Skip to content

Electrical Engineering

Trenching, cable laying, cable-tray installation and HV/LV terminations for a Genser Energy power plant.

Underground Cabling & HV Terminations — photo 1

Genser Energy has relied on Germatek as an electrical and mechanical supplier since 2018. On this package our crews excavated and prepared the cable trenches, laid and marked the underground cables, installed the cable trays and racking, and completed the HV and LV terminations at the transformers and switchgear.

Every trench was backfilled with warning tape and route markers, and all terminations were tested before handover.

Scope of work

  • Cable trench excavation and backfill
  • Underground cable laying and route marking
  • Cable tray and racking installation
  • HV cable terminations
  • LV terminations and glanding
  • Insulation resistance testing

Project gallery

More electrical engineering projects

Power Supply to E&P Laydown Installations — photo 1Electrical Engineering
Cardinal Namdini Mining2024

Power Supply to E&P Laydown Installations

Design-to-commissioning power supply for the E&P laydown area — transformer installation, MV terminations, overhead line works and LV distribution.

Namdini, Bolgatanga, Upper East Region

11kV Overhead Line Extension — photo 1Electrical Engineering
Adamus Resources Limited2022

11kV Overhead Line Extension

Extension of the 11kV supply line from the detox area to the seepage well, including pole erection, a pole-mounted transformer and a DB shelter.

Western Region, Ghana

Servicing of 11kV Circuit Breakers — photo 1Electrical Engineering
Adamus Resources Limited2022

Servicing of 11kV Circuit Breakers

Inspection, servicing and testing of the 11kV switchgear circuit breakers in the plant substation.

Western Region, Ghana